Installation
Antenna Connection
External Equipment Connections
Antenna or Cable Service without a Cable Box Connections
For optimum picture quality, adjust antenna direction if needed.
| wall antenna |
| socket |
| Bronze Wire |
| RF coaxial wire (75 ohm) |
VHF antenna | Turn clockwise to tighten. |
UHF antenna |
|
| outdoor |
| antenna |
Bronze Wire
Be careful not to bend the bronze wire when connecting the antenna.
VCR Setup
Cable TV Setup
After hooking up the connection turn the TV on and preform a channel search. On the remote press menu, Auto program will be highlighted, and then press right(Volume Up)twice.
In a poor signal area to improve picture quality, purchase and install a signal amplifier.
If the antenna is not installed properly, contact your dealer for assistance.
Connection & Viewing Setup
1. Set VCR switch to 3 or 4 and then tune TV to the same channel number.
2. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
-If your cable service does not require separate converter box please following the instructions for an antenna connection above.
-For further cable TV information, contact a local cable service provider.
Connection & Viewing Setup
1. Select 3 or 4 with channel switch on cable box.
2. Tune the TV channel to the same selected output channel of cable box.
3. Select channels at the cable box or with the cable box remote control.
13