Installation

Flaring Work

Main cause for gas leakage is due to defect in flaring work. Carry out correct flaring work in the following procedure.

Cut the pipes and the cable.

1.Use the piping kit accessory or the pipes purchased locally.

2.Measure the distance between the indoor and the outdoor unit.

3.Cut the pipes a little longer than measured distance.

4.Cut the cable 1.5m(59.1in) longer than the pipe length.

Copper

 

Slanted Uneven Rough

pipe

90¡

Burrs removal

Pipe

1.

Completely remove all burrs from the cut cross

Reamer

 

section of pipe/tube.

 

2.

Put the end of the copper tube/pipe in a

Point down

 

 

downward direction as you remove burrs in order to avoid dropping burrs into the tubing.

Putting nut on

Remove flare nuts attached to indoor and outdoor unit, then put them on pipe/tube having completed burr removal.

(not possible to put them on after flaring work)

Flare nut

Copper tube

Flaring work

Carry out flaring work using flaring tool as shown below.

Outside diameter

 

A

 

 

 

 

 

mm

inch

mm

 

inch

Ø6.35

1/4

0~0.5

 

0~0.020

Ø9.52

3/8

0~0.5

 

0~0.020

Ø12.7

1/2

0~0.5

 

0~0.020

Ø15.88

5/8

0~1.0

 

0~0.039

Firmly hold copper pipe in a die in the dimension shown in the table above.

 

"A"

Handle

Bar

Bar

 

 

 

Yoke

 

 

Cone

Copper pipe

Clamp handle

Red arrow mark

16Room Air Conditioner

Page 16
Image 16
LG Electronics LS122CE installation manual Flaring Work

LS122CE specifications

The LG Electronics LS122CE is a sophisticated air conditioning unit designed to provide optimal cooling and comfort for residential and commercial spaces. This system embodies modern technology and innovative design, making it a top choice for individuals looking to invest in an efficient cooling solution.

One of the main features of the LS122CE is its impressive energy efficiency. This air conditioning unit is equipped with inverter technology, which allows the compressor to adjust its speed according to the cooling demands of the environment. This not only results in reduced energy consumption but also leads to a quieter operation, making it ideal for indoor settings where noise can be a disturbance.

In addition to energy efficiency, the LS122CE boasts a sleek and compact design. Its modern aesthetic ensures that it can blend seamlessly into any decor, while its space-saving design allows for easy installation in various locations. Whether installed in a living room, bedroom, or office space, the LS122CE provides effective cooling without occupying too much space.

Another notable characteristic of the LS122CE is its advanced air filtration system. The unit is equipped with a multi-stage filtration system that captures dust, allergens, and other airborne particles, helping to improve indoor air quality. This feature is particularly beneficial for those with respiratory issues or allergies, as it helps create a healthier living environment.

The LS122CE also comes with smart technology integration. Users can control the air conditioning unit through their smartphones or smart home systems, allowing for remote accessibility and convenience. This feature enables users to adjust settings from anywhere, ensuring that their space is always at the desired temperature upon arrival.

Furthermore, the LS122CE is designed with user-friendly controls, making it easy to navigate even for those who may not be technologically savvy. The intuitive interface allows for straightforward adjustments to temperature settings, fan speeds, and modes without hassle.

In summary, the LG Electronics LS122CE air conditioning unit is a remarkable combination of efficiency, modern design, advanced air filtration, and smart technology. These features make it a reliable choice for those seeking superior cooling performance while ensuring a comfortable and healthy indoor atmosphere. With its innovative characteristics, the LS122CE stands out as an exemplary model in the air conditioning market, addressing the needs of today's consumers.