Installation

Soap water method

(1)Remove the caps from the gas side and liquid side valves.

(2)Remove the service-port cap from the gas side valve.

(3)To open the gas side valve turn the valve stem counterclockwise approximately 90°, wait for about 2~3 seconds, and close it.

(4)Apply a soap water or a liquid neutral detergent on the indoor unit connection or outdoor unit connections by a soft brush to check for leakage of the connecting points of the piping.

(5)If bubbles come out, the pipes have leakage.

Evacuation

Connect the charge hose end described in the preceding steps to the vacuum pump to evacuate the tubing and indoor unit.

Confirm the "Lo" knob of the manifold valve is open. Then, run the vacuum pump.

The operation time for evacuation varies with tubing length and capacity of the pump. The following table shows the time required for evacuation.

Required time for evacuation when 30 gal/h

vacuum pump is used

If tubing length is less

if tubing length is longer

than 10m (33 ft)

than 10m (33 ft)

 

 

10 min. or more

15 min. or more

When the desired vacuum is reached, close the "Lo" knob of the manifold valve and stop the vacuum pump.

Finishing the job

With a service valve wrench, turn the valve stem of liquid side valve counter-clockwise to fully open the valve.

Turn the valve stem of gas side valve counter- clockwise to fully open the valve.

Loosen the charge hose connected to the gas side service port slightly to release the pressure, then remove the hose.

Replace the flare nut and its bonnet on the gas side service port and fasten the flare nut securely with an adjustable wrench. This process is very important to prevent leakage from the system.

Replace the valve caps at both gas and liquid side service valves and fasten them tight.

This completes air purging with a vacuum pump. The air conditioner is now ready to test run.

Suction Line

Evaporator Line

3-way valve (Close)

3-way valve (Open)

Cap

Hexagonal wrench

Indoor unit

Outdoor unit

 

Manifold valve

Pressure

Hi

gauge

Lo

 

 

 

Open

Close

Vacuum pump

28Room Air Conditioner

Page 28
Image 28
LG Electronics LS122CE installation manual Soap water method

LS122CE specifications

The LG Electronics LS122CE is a sophisticated air conditioning unit designed to provide optimal cooling and comfort for residential and commercial spaces. This system embodies modern technology and innovative design, making it a top choice for individuals looking to invest in an efficient cooling solution.

One of the main features of the LS122CE is its impressive energy efficiency. This air conditioning unit is equipped with inverter technology, which allows the compressor to adjust its speed according to the cooling demands of the environment. This not only results in reduced energy consumption but also leads to a quieter operation, making it ideal for indoor settings where noise can be a disturbance.

In addition to energy efficiency, the LS122CE boasts a sleek and compact design. Its modern aesthetic ensures that it can blend seamlessly into any decor, while its space-saving design allows for easy installation in various locations. Whether installed in a living room, bedroom, or office space, the LS122CE provides effective cooling without occupying too much space.

Another notable characteristic of the LS122CE is its advanced air filtration system. The unit is equipped with a multi-stage filtration system that captures dust, allergens, and other airborne particles, helping to improve indoor air quality. This feature is particularly beneficial for those with respiratory issues or allergies, as it helps create a healthier living environment.

The LS122CE also comes with smart technology integration. Users can control the air conditioning unit through their smartphones or smart home systems, allowing for remote accessibility and convenience. This feature enables users to adjust settings from anywhere, ensuring that their space is always at the desired temperature upon arrival.

Furthermore, the LS122CE is designed with user-friendly controls, making it easy to navigate even for those who may not be technologically savvy. The intuitive interface allows for straightforward adjustments to temperature settings, fan speeds, and modes without hassle.

In summary, the LG Electronics LS122CE air conditioning unit is a remarkable combination of efficiency, modern design, advanced air filtration, and smart technology. These features make it a reliable choice for those seeking superior cooling performance while ensuring a comfortable and healthy indoor atmosphere. With its innovative characteristics, the LS122CE stands out as an exemplary model in the air conditioning market, addressing the needs of today's consumers.