Installation
| Water Connection Instruction Guide |
Connecting | Read all directions carefully before you begin. |
the Refrigerator |
|
to a Water Source |
|
Warning | Connect to potable water supply only. |
|
|
| IMPORTANT |
| • If operating the refrigerator before installing the water connection, turn icemaker |
| to the OFF position to prevent operation without water. |
| • All installations must be in accordance with local plumbing code requirements. |
| • Use copper tubing and check for leaks. |
| • Install copper tubing only in areas where temperatures will remain above freezing. |
| • It may take up to 24 hours for your icemaker to begin producing ice. |
Tools Required |
|
Standard screwdriver | |
| |
| |
| |
| Hand drill or electric drill (properly grounded) |
NOTE
•Your refrigerator dealer has a kit available with a
Cold Water Supply The icemaker water valve contains a flow washer which is used as a water pressure regulator.
The icemaker needs to be connected to a cold water line with water pressure 30~120psi(lb/inch2)
8