LG Electronics LSN, LSU-HSV2, HV2 Timer Setting, To cancel the timer setting, Sleep Mode Operation

Operating Instructions

Timer Setting

	Description		Button on the	Indication on the LCD Display
			Remote Controller
1	Press the Timer button once to set on the
	Reserved 'On'
	(Press the Timer button twice to set		the
	Reserved 'Off')
2	Press the Time Setting buttons until the
	desired time is set.
	- The order of a.m. and p.m. -> hour
	->minute is repeated whenever you press
	the < > button.
	- By pressing the	button, you can set
	the desired time.
3	Press the SET/CLEAR BUTTON
	(Press the SET/CLEAR BUTTON once more
	to cancel)

To cancel the timer setting

•If you wish to cancel all timer setting, press the SET/CLEAR button.

•In order to cancel the timer settings individually, press the Timer button to select Reserved 'On' or Reserved 'Off'. And then press the Set/Clear button aiming the remote controller at the signal receiver. (the timer lamp on the display will go off)

Sleep Mode Operation

Press the SLEEP MODE AUTO BUTTON to set the time when you want the unit to stop automatically. The timer is programmed in one-hour increments by pressing the SLEEP MODE AUTO BUTTON 1 to 7 times. The sleep mode is available for 1 to 7 hours.

NOTE

•The sleep mode will operate indoor fan at super low speed in cooling mode and at low speed in heating mode for pleasant sleep.

In cooling mode or healthy dehumidification mode:

The setting temperature will rise automatically two times by 1°C(2°F) over next consecutive 30 minutes [Maximum 2°C(4°F)] for a comfortable sleep. This will be the final setting temperature as long as sleep mode is functioning.

ENGLISH

Owner's Manual 15