Operating Instructions
Air Circulation Operation
This operation circulates the air without cooling or heating. It can be | MODE | ||||
activated by pressing the OPERATION MODE SELECTION |
|
|
|
| |
|
|
|
|
| |
|
|
| |||
BUTTON. Once the air circulation is activated you can select the fan |
|
|
|
|
|
speed by pressing the INDOOR FAN SPEED SELECTION BUTTON. |
| ||||
| |||||
NOTE : During this opertion , 'Cooling' lamp lights up.
Auto Clean Operation
❏During Auto Clean Operation, moistures left in indoor units after cooling operation or healthy dehumidification operation can be removed.
Select Auto Clean Operation by the function setting button( 
) . Now whenever the unit is turned off, the indoor fan is still running for about 30 minutes internally without cooling or dehumidification operation. This function dries up any remains of moisture & cleans the unit internally. If you push the Auto Clean button again, this function is cancelled.
NOTE
❏During Auto Clean fuction, only ON/OFF button, Plasma button, Auto Clean button is used. During this operation, 'Cooling' lamp lights up.
PLASMA Purification Operation(Optional)
Plasma filter is a technology developed by LG to get rid of microscopic contaminants in the intake air by generating a plasma of high charge electrons. This plasma kills and destroys the contaminants completely to provide clean and hygienic air.
ENGLISH
Plasma purification operation can be started by pressing the PLASMA BUTTON on the remote controller.
Repressing it will deactivate the operation.
PLASMA
NOTE
•This features can be used in any operation mode and fan speed by pressing the plasma button.
•Separate plasma purification operation is possible in stop condition. It is cancelled by pressing plasma button or on/off button.
Owner's Manual 13
