JVC VR-716E instruction manual Continuing with Recording Upon Recovery from Power Failure

Continuing with Recording Upon Recovery from Power Failure

VR-716 is equipped with a Recovery Recording feature that starts recording automatically upon recovery from a power failure. With this feature, restoration procedure will not be required when a power failure occurs during recording.

1.4.

SEARCH	MENU	HDD	OPERATE
	REV	FWD
			LOCK

1. Press the [MENU] button

•Follow procedures in ‘Changing Menu Settings’ on page 22 to display the “OPERATION/EXT REC” Menu.

EXECUTE	OUT
	VIDEO AUDIO
	SKIP

2.3.

MENU

2. Press [ ] to select the “RECOVERY REC” item

OPERATION/EXT REC
[ OPERATION ]
1.RECOVERY REC	OFF
2.REPEAT REC	OFF
3.LANGUAGE SELECTION	ENGLISH
4.WATER MARK	OFF
5.OPERATION LOCK	ALL
[EXT REC]
1.EXT REC MODE	OFF
2.SERIES REC	OFF

Note

•The “POWER OUTAGE LOG IS UPDATED” message will be displayed on the monitor only when the “WARNING” item in the “ONSCREEN MODE” Menu (☞ page 23) is set to “ON”. Press the [CANCEL] button to clear the message display.

Caution

•Hard Disk Checking is performed upon re- covery from a power failure, which may take a while before recording starts. It may take a long time when the data is fragmented or when there is a large amount of recorded data.

•A list containing the date and time at which power failure is restored can be viewed. (☞ Page 60)

•When the Program Timer is set, recording will resume in the same mode after restor- ing from a power failure.

• Move the cursor to select.

3. Turn the jog dial to select an operating mode

• “PRIOR STATE”:

When a power failure occurs during	OPERATION/EXT REC
recording, recording will start again
	[ OPERATION ]
		1.RECOVERY REC	NORMAL REC
upon restoration. If power failure occurs		2.REPEAT REC	OFF
		3.LANGUAGE SELECTION	ENGLISH
when the equipment is in the Sensor		4.WATER MARK	OFF
		5.OPERATION LOCK	ALL
		[EXT REC]
Record mode (☞ page 66), however,		1.EXT REC MODE	OFF
		2.SERIES REC	OFF
recording will not start automatically
upon restoration.

•“NORMAL REC”:

Recording resumes upon recovery from a power failure, regardless of the mode prior to the failure.

4.Press [MENU] to end setting

•The display returns to the normal screen.

MENU

⬛Notification of Power Outage

•The following message will be displayed on the monitor screen when a power outage occurs, and the [other E-04] message will appear on the front display.

01-03-2003 SA 12:34:56

100% AL-0

POWER OUTAGE LOG IS UPDATED

71