Philips 220BW8 user manual Adjustment, User mode 10 modes

Front Controls

1.When pressing any function pad, the "Shift" LED will flash once to indicate the function has been selected.

2.Once the limit of the adjustable range has been reached, the shift LED will flash continuously.

RETURN TO TOP OF THE PAGE

Adjustment

For Tne monitor is pre-set with 6 modes for optimal display size and centering as indicated in the following table:

Mode	Resolution		Horizontal		Vertical	Remark
			Freq. (KHz)		Freq. (KHz)
	(dots x lines)
VGA	600 X 400	31.5		70		Non-interlaced
VGA	600 X 480	31.5		60		Non-interlaced
VESA / 75	600 X 480	37.5		75		Non-interlaced
VESA / 75	600 X 480	46.9		75		Non-interlaced
VESA / 85	800 X 600	53.7		85		Non-interlaced
VESA	1024 X 768	48.3		60		Non-interlaced

(A)User mode: (10 modes)

●The set will save the user's setting parameters automatically. After 10 seconds of key-pad inactivity, the LED will flash twice to indicaate the parameters being saved.

●Press to recall factory preset mode. (at second level)

RETURN TO TOP OF THE PAGE

file:///D/EDFU/LF3/lf3manual/english/Install_1/FRONT/Front.htm (3 of 3) [2003/3/27 ?? 10:40:35]