“ALARM/SENSOR MODE” Menu
This menu is used for specifying settings related to alarm or sensor recording.
Alarm/sensor inputs are either received via the [ALARM IN] terminal at the rear panel of
[ ● ] are factory settings. (Setting is disabled when in the Recording mode.)
Item | Settings |
|
| Description |
|
|
| ||
“BLOCK” | ● 1 | For selecting the camera channel block for which alarm or sensor recording settings | ||
| 2 | are to be specified. |
| |
| 3 | 1 : Sets to Camera Channels 1 - 4. | ||
| 4 | 2 : Sets to Camera Channels 5 - 8. | ||
|
| 3 : Sets to Camera Channels 9 - 12. | ||
|
| 4 : Sets to Camera Channels 13 - 16. | ||
|
|
| ||
“REC MODE” | ● “ALARM” | For specifying settings related to alarm and sensor recording. | ||
| “SENSOR” | “ALARM” |
| : Starts alarm recording only when |
| “ALARM/SENSOR” |
|
| recording mode. |
|
| “SENSOR” | : Starts sensor recording only when | |
|
|
|
| mode. |
|
| “ALARM/SENSOR” | : Starts alarm recording when in the normal recording mode | |
|
|
|
| and sensor recording when in the Stop mode. |
|
| ☞ Page 66 ‘Activation of Recording Via External Alarm/Sensor Signals’ | ||
|
|
| ||
“FRAME RATE” | ● “25 IPS” | For setting the frame rate during alarm recording. Value is set according to the no. of | ||
| “12.5 IPS” | images to record in 1 second. | ||
| “8.3 IPS” |
|
|
|
| “4.2 IPS” |
|
|
|
|
|
| ||
“QUALITY” | ● “H” | For setting the picture quality during alarm recording. | ||
| “N” | “H” : HIGH (High picture quality) | ||
| “B” | “N” : NORMAL (Normal picture quality) | ||
| “L” | “B” : BASIC (Basic picture quality) | ||
|
| “L” : LONG | ||
|
|
| ||
“DURATION” | “10 SEC” | For setting the duration of alarm or sensor recording. | ||
| “15 SEC” | “10 SEC” ~ “180 SEC” : Duration of alarm/sensor recording. | ||
| “30 SEC” | “MANUAL” |
| : Continues alarm/sensor recording when alarm signals are |
| “60 SEC” |
|
| input. (Maximum: 20 minutes) |
| “120 SEC” |
|
| In the case of alarm or sensor recording via Motion Detect, |
| ● “180 SEC” |
|
| recording lasts for a duration of 10 seconds upon the last |
| “MANUAL” |
|
| sensor detection. |
“AUDIO REC” | ● “ON” | For setting whether to record audio signals. | ||
| “OFF” | “ON” | : Audio signals recorded. | |
|
| “OFF” | : Audio signals not recorded. | |
|
|
| ||
“PRESENSOR REC” | “ON” | For setting whether to activate presensor recording. | ||
| ● “OFF” | Select “ON” to activate presensor recording. | ||
|
| ☞ Page 113 ‘Presensor Recording’ | ||
|
|
| ||
“PRESENSOR REC | ● “10 SEC” | For setting the duration of presensor recording. | ||
DURATION” | “20 SEC” | “10 SEC” | : Activates presensor recording over an interval of 10 ~ 20 seconds. | |
| “30 SEC” | “20 SEC” | : Activates presensor recording over an interval of 20 ~ 30 seconds. | |
|
| “30 SEC” : Activates presensor recording over an interval of 30 ~ 60 seconds. | ||
|
| ☞ Page 113 ‘Presensor Recording’ | ||
|
|
|
|
|
27
