JVC VR-716E Series Recording Using 2 or More VR-716 Recorders, Connection, Setting

Series Recording Using 2 or More VR-716 Recorders

Recording using 2 or more VR-716 recorders is possible. Once the first VR-716 is full, recording automatically starts at the second VR-716.

• •

•

Camera• 1

•

<VR-716 1>
AUDIO IN
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15			16
VIDEO IN
THRU OUT
	SCSI							CAUTION
				AUDIO OUT		VIDEO OUT
RS-232C		UPS	LAN	1	2	1	2						1	4/	16	5	8
																		AC IN
																		(220V–240V	)
																		SIGNAL GND
											ALARM		9		12	13	16
															EE OUT
AUDIO IN
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15			16
VIDEO IN
THRU OUT
	SCSI							CAUTION
				AUDIO OUT		VIDEO OUT
RS-232C		UPS	LAN	1	2	1	2						1	4/	16	5	8	AC IN
																		(220V–240V	)
																		SIGNAL GND
											ALARM		9		12	13	16
															EE OUT
<VR-716 2>

Connection

<Connection of the Signal Input/Output Terminals>

•Connect the [SERIES REC OUT] terminal at the rear panel of the first VR- 716 to the [SERIES REC IN] terminal of the second.

•Connect the [CLOCK RESET OUT] terminal of the first VR-716 to the [CLOCK RESET IN] terminal of the second.

•Connect the [COM] terminal of the first VR-716 to the same terminal at the second.

<Connection between the 2 VR-716 Recorders>

Camera 16

•Connect the [THRU OUT] terminals 1 - 16 of the first VR-716 to the [VIDEO IN] terminals 1 - 16 of the second VR-716 accordingly.

<Signal Input/Output Terminals>

[COM]

1	3	5	7		9	11	13	15	RST	COM IN		IN	EXT REC
2	4	6	8		10	12	14	16	OUT		CLK	SER
										WAR	RST	REC	COM
				ALARM						OUT	OUT	OUT
				[CLOCK RESET OUT]								[SERIES REC OUT]
					[CLOCK RESET IN]							[SERIES REC IN]

[COM]

1	3	5	7		9	11	13	15	RST	COM	IN	IN	EXT REC
2	4	6	8		10	12	14	16	OUT		CLK	SER
										WAR	RST	REC	COM
				ALARM						OUT	OUT	OUT

Setting

•Specify the same settings for both recorders in the “REC MODE” Menu (☞ Page 24).

•In the “OPERATION” Menu, specify a value other than “NORMAL REC” for the “RECOVERY REC” item.

•In the “OPERATION” Menu (☞ Page 25) of the first VR-716, set “REPEAT REC” to “OFF”.

•Set the “SERIES REC” item in the “EXT REC” Menu (☞ Page 25) to “ON” for both recorders.

Notes

•When the [CLOCK RESET OUT/IN] terminals are connected, the clock in the 2 or more VR-716 recorders will be synchronized twice a day at 12:00 am and 12:00pm.

•Turn off the power of the equipment before connecting.

•Recording at the second VR-716 can only be stopped by using the [STOP] button on it.

•Recording will not start upon input of signals when the [OPERATE] button is in the OFF mode.

•Recording will not start when in the Program Timer Standby mode.

•When the power of the first VR-716 is cut off, the second VR-716 starts recording automatically.

Activation of Recording Via External Signals

While in the Stop mode, recording starts when the [EXT REC IN] terminal at the rear panel receives input signals from external devices.

[EXT REC IN]

Setting

1. Set the “EXT REC MODE” item in the “EXT REC” Menu to “TRIGGER” or “MANUAL”.

													Notes
1	3	5	7	9	11	13	15	RST	COM	IN	IN	EXT REC	• When this is set to “MANUAL”, recording is executed only while input
2	4	6	8	10	12	14	16	OUT		CLK	SER
									WAR RST		REC	COM	signals are received.
				ALARM					OUT	OUT	OUT

•When this is set to “TRIGGER”, recording will continue between the interval when input signals are received until after execution of the Stop operation. Recording can only be stopped by using the [STOP] button on VR-716. Recording cannot be stopped using an external device.

•Recording will not start upon input of signals when the [OPERATE] button is in the OFF mode.

•Recording will not start when in the Program Timer Standby mode.

61