9.
SEARCH | MENU |
REV
EXECUTE
HDDOPERATE
FWD
LOCK
OUT
VIDEO AUDIO
6. Press [ 
/ 
] to move the cursor to the “BLOCK” item
ALARM/SENSOR MODE |
|
1.BLOCK | 3 |
2.REC MODE | ALARM |
3.FRAME RATE | 25 IPS |
4.QUALITY | H |
5.DURATION | 180SEC |
6.AUDIO REC | ON |
SKIP
6.8.7.8.
7. Turn the jog dial to select “3”
7.PRESENSOR REC | OFF |
8.PRESENSOR REC DURATION | 10SEC |
9.EXT INPUT OPERATING MODE | OFF |
10.MOTION DETECT | OFF |
11.MOTION DETECT SETTING |
|
• Setting can now be performed for Camera 9 ~ Camera 12.
REV | FWD |
Notes
• In the case when “REC MODE” is set to |
“ALARM”, press the [REC] button after |
menu setting is completed. Alarm record- |
ing will be executed in the specified mode |
when alarm input is received. |
• In the case when “REC MODE” is set to |
“SENSOR”, press the [STOP] button after |
menu setting is completed. Sensor record- |
ing will be executed in the specified mode |
when alarm input is received. |
• Press the [CANCEL] button to stop the |
buzzer sound during alarm or sensor re- |
cording. Press the [CANCEL] button again |
during alarm recording to return to the nor- |
8. Repeat procedure in Step 5 to select the “REC MODE” item and set a value accordingly
9. Press [MENU] to end menu setting
•The display returns to the normal screen.
•The [AL REC] or [SENSOR REC] indicator on the front display will appear.
Front Display
MENU
⬛Notification During Alarm Recording or Sensor Recording
mal recording mode or during sensor re- |
cording to stop the operation. |
• Press the [CANCEL] button once again and |
the Alarm/Sensor [AL] indicator on the front |
display will stop blinking. |
| Front Display | [CANCEL] | |
5 | 6 |
| CANCEL SEARCH |
|
| ||
7 | 8 |
| TIMER |
13 | 14 |
|
|
|
|
| DISPLAY |
| SEQUENCE | REC STOP | PLAY STILL |
| MULTI |
|
|
15 | 16 |
|
|
FDP/BUZZER |
|
[ FDP ] |
|
1.ALARM/SENSOR MODE | ON |
2.ALARM/SENSOR BLINK | ON |
3.SEQUENTIAL MONITOR | ON |
4.INPUT SIGNAL ERROR | ON |
5.WARNING | ON |
[BUZZER] |
|
1.HDD FULL | OFF |
2.ALARM/SENSOR | OFF |
3.WARNING | OFF |
MONITOR DISPLAY |
|
1.EE OUT | |
2.SINGLE PICTURE MODE |
|
3.QUAD PICTURE MODE |
|
BLOCK 1 | 1SEC |
BLOCK 2 | 1SEC |
BLOCK 3 | 1SEC |
BLOCK 4 | 1SEC |
4.ALARM/SENSOR SWITCH | OFF |
5.SPLIT SCREEN BORDER COLOR | BORDER3 |
[AL] indicator on the front display will appear during alarm or sensor recording when this is set to “ON”.
[AL] indicator on the front display will blink after alarm or sensor recording has ended when this is set to “ON”.
Buzzer will sound when this is set to “ON”.
For setting the switching mode of the monitor screen when alarm signals are received. ☞ Page 26 ‘MONITOR DISPLAY Menu’
67
