LG Electronics LT-15AEP owner manual External Equipment Connection, Antenna connection, Scart jack

External Equipment Connection

You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below.

External Equipment Connection

S-VIDEO INPUT

If using an S-VIDEOsource, the picture quality will be improved over a video source.

Antenna connection

1.Connect RF out on the VCR to the Antenna input on the rear of the TV.

2.Connect the antenna cable to the antenna in jackon the VCR.

3.Press the TV/AV button to select Antenna input source.

4.Press the PLAY button on the VCR.

VCR

1.Connect the S-VIDEO output of a VCR to the S-VIDEOinput on the TV.

2.Connect the audio cables from the S-VIDEO VCR to the L (MONO) R inputs on the TV.

3.Select S-VIDEOmode by pressing the TV/AV button repeatedly.

4.Press the PLAY button on the VCR.

The VCR playback picture appears on the screen.

SCART	A/V-IN
	S-VIDEOL(MONO) R

S-VIDEO VCR

SCART jack

1.Connect the Video outputs (Y Cb Cr) on a DVD to the SCART on the TV.

2.Press the TV/AV button to select SCART mode.

3.Press the PLAY button on the DVD.

A/V INPUT

1.Connect the A/V out jacks on a VCR to A/V-IN jacks on the TV.

2.Press the TV/AV button to select VIDEO mode.

3.Press the PLAY button on the VCR.

The VCR playback picture appears on the TV screen. Note : If you have a mono VCR, connect the audio cable from the VCR to the A/V-INsocket of the set.

POWERSCART

COMPONENT

(DVD)

SCART	A/V-IN
	L(MONO) R

VCR

Headphone jack

Insert the headphone plug to the headphone jack on the TV. You can listen to the sound through the headphone; no sound form the speaker on the TV. To adjust the headphone volume, press the VOLÏq button. If you press the MUTE button, the sound from the headphone is turned off.

Headphone

22 23