LG Electronics LT-15AEP owner manual Connecting PC as monitor, Picture adjustment

Connecting PC as monitor

Connecting PC as monitor

Picture adjustment

You can adjust picture Contrast, Brightness, Horizontal/Vertical position, Clock, Phase, Auto and Reset as you prefer.

1.Press the TV/AV button to select the PC mode.

2.Press the MENU button.

3.Press the PRxy button to select the desired picture item.

4.Press the VOLÏq button to make appropriate adjustments.

Contrast	Clock
Brightness	Phase
Temperature	AUTO Auto
H-position	Reset
V-position

Contrast

This function is to adjust picture to light/dark.

Brightness

This function is to adjust brightness of picture.

Temperature

Temperature is a measure of the warmth of the image color.

Horizontal Position/Vertical Position

This function is to adjust picture to left/right and up/down as you prefer.

Clock

This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change.

Phase

This function allows you to remove any horizontal noise and clear or sharpen the image of characters.

Auto

This function is for the automatic adjustment of the screen position, clock and clock phase. The displayed image will disappear for a few seconds while the Auto-configuration is in process.

Note: Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor’s position, clock and clock phase manually.

Reset

This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed.

Contrast

x

0 Ï 90 q 100

y

AUTO

1024 X 768

▲▼ ◀▶ MENU%%TV/AV

POWER

SSMPSM

I/II Q.VIEW

MENUTV/AV

PRV

CVOL OK VOLB

PRW

TEXT/MIX SIZE SLEEP INDEX

UPDATE TIME REVEAL

PC/DTV INPUT

1. Connect the PC IN cable (D sub jack) from the monitor output socket of the PC to the PC/DTV input socket of the set.

2. Connect the PC Audio IN cable from the PC to the PC Audio IN of the set.

3.Press the TV/AV button to select PC mode.

4.Switch on the PC, and the PC screen appears on the set.

The set can be operated as the PC monitor.

Note : If you have an Apple Macintosh, connect the VGA desktop block from the 3 rows 15 pin to 2 row 15 pin with the signal cable and connect the XGA desktop block to the Macintosh.

Resolution

Mode	Resolution	Horizontal	Vertical
		frequency (KHz)	frequency (Hz)
	640X480	31.5 KHz	60 Hz
	640X480	35 KHz	67 Hz
VGA	640X480	37.9 KHz	72 Hz
	640X480	37.5 KHz	75 Hz
	640X480	43.5 KHz	85 Hz
	720X400	31.5 KHz	70 Hz
	800X600	35.2 KHz	56 Hz
SVGA	800X600	37.9 KHz	60 Hz
	800X600	48.1 KHz	72 Hz
	800X600	46.9 KHz	75 Hz
(MAC)	800X600	53.7 KHz	85 Hz
	832X624	49.7 KHz	75 Hz
	1024X768	48.4KHz	60Hz
XGA	1024X768	56.5 KHz	70 Hz
	1024X768	60.2 KHz	75 Hz
	1024X768	68.7 KHz	85 Hz

Note:

a. If the set is cold, there may be a small “flicker” when the set is switched on. This is normal, there is nothing wrong with the set.

b. Some dot defects may appear on the screen, like Red, Green or Blue spots. However, this will have no impact or effect on the monitor performance.

5. Press the TV/AV button to store the adjustment.

24 25