10Attach the front grille to the cabinet by inserting the
tabs on the grille into the tabs on the front of the cabinet. Push the grille in until it snaps into place. (See Fig. 21)
11Lift the inlet grille and secure it with a screw (Type A)
through the front grille.(See Fig. 21)
12 Window installation of room air conditioner is now completed. See ELECTRICAL DATA for attaching power cord to electrical outlet.
Fig. 21
Electrical Data
Line Cord Plug | Use Wall Receptacle | Power Supply |
Do not under any |
|
|
circumstances cut |
| Use 15 AMP, time |
or remove the |
| |
grounding prong |
| delay fuse or circuit |
from the plug. |
| breaker. |
|
| |
Power supply cord with | Standard 125V, |
|
receptacle rated 15A, 125V AC |
|
Use of extension cords
•Because of potential safety hazards, we strongly discourage the use of an extension cord. However, if you wish to use an extension cord, use a CSA
Electrical
Data (L1804R, LW1800ER MODELS)
Line Cord Plug | Use Wall Receptacle | Power Supply |
230V/208V
Use 15 AMP circuit. Refer to nameplate for correct fusing.
tandem type
All wirring should be made in accordance with local electrical codes and regulations.
NOTICE : Aluminum house wiring may pose special problems.
Consult a qualified electrician.
24
