WP Series
Installation Kits Contents
ENGLISH
1 |
|
| 2 | 3 | 4 | 5 |
6 | 7 | 8 | 9 | 10 |
| 11 |
15 | 12 | 13 |
|
|
|
|
|
|
|
|
|
| 14 |
NO. | NAME OF PARTS | Q'TY |
1 | FRAME CURTAIN | 2 |
2 | SUPPORT BRACKET | 2 |
3 | SILL BRACKET | 2 |
4 | LOCK NUT | 4 |
5 | SCREW (TYPE A) | 14 |
6 | SCREW (TYPE B) | 7 |
7 | SCREW (TYPE C) | 5 |
8 | SCREW (TYPE D) | 2 |
9 | CARRIAGE BOLT | 2 |
10 | FOAM STRIP | 1 |
11 | FOAM SEAL | 1 |
12 | WINDOW LOCKING BRACKET | 1 |
13 | DRAIN PIPE | 1 |
14 | 1 | |
15 | FRAME GUIDE | 2 |
Suggested Tool Requirements
SCREWDRIVER(Philips and Flatead), RULER, KNIFE, HAMMER, PENCIL, LEVEL
PREPARATION OF CHASSIS | Shipping | |
Screws | ||
|
1 Remove the screws which fasten the cabinet at both sides and at the back.
2 Slide the unit from the cabinet by gripping the base pan handle and pulling forward while bracing the cabinet.
3 Cut the window sash seal to the proper length.
Peel off the backing and attach the 
to the underside of the window sash.
4 | Remove the backing from the top upper guide |
|
| |
| and attach it to the bottom of the Upper Guide. |
|
| |
5 Attach the upper guide onto the top of the cabinet with 3 |
|
| ||
| Type A screws . |
|
| Upper guide |
|
|
|
| |
6 | Insert the Frame Guides | into the bottom of the |
|
|
| cabinet. |
| 11 |
|
|
|
|
| |
7 | Insert the Frame Curtain | into the Upper Guide and | Upper guide | 14 |
| ||||
| Frame Guides . |
|
|
|
8 Fasten the curtains to the unit with 10 Type A screws 
.
(Type A) 5
15 | (Type A) |
5 |
21
