LG Electronics LW701 HR Installation, HowtoInstalltheUnit, WindowRequirements, Owner’s Manual

Installation

HowtoInstalltheUnit

1. To prevent vibration and noise, make sure the unit
is installed securely and firmly	Fence
	Awning

2.Install the unit where the sunlight does not shine directly on the unit.

3.The outside of the cabinet must extend outward for at least 11" and there should be no obstacles, such as a fence or wall, within 20" from the back of the cabinet because it will prevent heat radiation of the condenser.

Restriction of outside air will greatly reduce the cooling efficiency of the air conditioner.

Cooled air

30"~60"

Heat radiation

About 1/2"

Over 20"

All side louvers of the cabinet must remain exposed to the outside of the structure.

4.Install the unit a little slanted so the back is slightly lower than the front(about 1/2"). This will force condensed water to flow to the outside.

5.Install the unit with the bottom about 30"~60" above the floor level.

WindowRequirements

NOTICE

All supporting parts should be secured to firm wood, masonry, or metal.

This unit is designed for installation in standard double hung windows with actual opening widths from 22" to 36".

The top and bottom window sash must open sufficiently to allow a clear vertical opening of 14" from the bottom of the upper sash to the window stool.

22" to 36"

14" min Stool (With frame curtain)

Interior wall 18 1/2" min.

(Without frame curtain)

Offset

1/2" to 11/4"

Sill

Exterior

Owner’s Manual 11