LG Electronics LW701 HR owner manual HowtoAttachDrainPanOptional, HowtoConnectaDrainHose, English

Operating Instructions

HowtoAttachDrainPan(Optional)

The air conditioner employs a proper drain method whereby the condensed water (moisture removed from the air) is drained to the outside.

In very humid weather, (and for reverse cycle models in the reverse mode) excessive condensate water removed from the air may cause some water to collect. To remove this excess water you can install the drain pan as detailed below.

ENGLISH

1.Take the drain pan which is located in the air discharge.

2.Remove the hole rubber from the base-pan (for some models).

3.Install the drain pan to the right corner of the cabinet with 4 (or 2) screws.

4.Connect the drain hose of 3/5" inside diameter to the outlet located at the bottom of the drain pan.You can purchase the drain hose or tubing locally to satisfy your particular needs. (Drain hose is not supplied).

CABINET

DRAIN

PAN

SCREW

DRAIN HOSE

HowtoConnectaDrainHose

A drain hole is provided at the rear of the air conditioner unit.

Select a drain method according to the following.

1.Remove the hole rubber from the base-pan. (for some models)

2.Connect a drain hose of 9/16" inside diameter to the drain pipe as shown in Fig. 1.

3.Or connect a pipe elbow of 9/16" inside diameter to the drain pipe, then connect a drain hose of 9/16" inside diameter to the pipe elbow as shown in Fig. 2.

Fig. 1

DRAIN PIPE

DRAIN HOSE

Fig. 2

DRAIN PIPE

DRAIN ELBOW

DRAIN HOSE

Owner’s Manual 19