Part 1 | SAFETY |
IMPORTANT NOTE
This installation must be completed by a qualified installer or technician.
•Please read the entire Installation Instructions prior to installation.
•Remove all packing materials from the oven compartments before connecting the electrical supply to the oven.
•Installer: please retain these instructions for local inspector’s reference, then leave them with the consumer.
•Consumer: please read and keep these instructions for future reference and be sure to read the entire OWNER’S MANUAL prior to use.
PREPARE TO INSTALL THE OVEN
WARNING
• The information in this manual should be followed exactly.
- A fire or electrical shock may result causing
property damage, personal injury or death. |
|
|
IMPORTANT NOTE | Phillips Screwdriver | Drill |
|
| |
Proper installation is the responsibility of the installer | PREPARE TO INSTALL THE OVEN | |
and product failure due to improper installation is | ||
NOT covered under warranty. |
|
|
English
EspañolWARNING
•DO NOT put any weight on the oven door. Never allow anyone to climb,
sit, stand or hang on the oven door.
-The oven could tip and injury might result from food or the oven itself.
WARNING
•The electrical power must be shut off while the electrical connections are
being made.
-Failure to do so can result in severe personal injury, death or electrical shock.
IMPORTANT NOTE
Observe all governing codes and ordinances. This appliance must be properly grounded.
6 Screws For | 6 Wood Screws |
Bottom Trim | For Mounting |
(3 needed for installation | (4 needed for |
and 3 extra’s) | installation and 2 |
| extra’s) |
30” (76.2 cm)
Metal Bottom Trim
MATERIALS NEEDED
Junction Box | Wire Nuts | 3/4” Conduit |
|
| Connector |
| 36” (91 cm) |
|
| of String |
|
- 3 -