LG Electronics M2762D Select Auto Config, Using ENTERRemocon or control key, Auto Config. G Enter

PICTURE CONTROL

Auto Configure (RGB [PC] mode only)

Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment.

Auto configure

This function is for automatic adjustment of the screen position, clock, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress.

1. Using OSD
	PICTURE		Move	Enter		SCREEN	Move	MENU Prev.
	D
	• Contrast	: 100				Resolution
	• Brightness	: 50				Auto Config.	G
	• Sharpness	: 70
	• Colour	: 50				Position		To Set
	• Tint	: 0	R		G	Size
	• Advanced Control
	• Reset					Phase
	Screen(RGB-PC)					Reset
1	Select PICTURE.
MENU						• If the position of the image is still not correct,
						try Auto adjustment again.
2						• If picture needs to be adjusted again after Auto
	Select SCREEN(RGB-PC).					adjustment in RGB (PC), you can adjust the
ENTER
						Position, Size or Phase.

3

ENTER

Select Auto Config.

4 5

ENTER Select Yes.

2. Using ENTER(Remocon or control key)

ENTER Run Auto Config.

This function is available for RGB signals only.

1
		Auto Config. G ENTER( )	• If you don’t want Auto Configure, do
ENTER	Press ENTER.
			not press ENTER .
2
	Press ENTER.	Auto in Progress	Auto in Progress
ENTER

For optimal display

<1920 x 1080 Resolution>	change resolution to 1920 x 1080
	<Others Resolution>

•Press the MENU button to close the menu window.

•Press the RETURN button to move to the previous menu screen.

47