Setting the
Clock
When your oven is plugged in for the first time or when power resumes after a power cut, a ‘0’ will be shown in the display; you will have to reset the clock.
If the clock (or display) shows any strange looking symbols, unplug your oven from the electrical socket and plug it back in and reset the clock.
During clock setting the colon will flash. After setting, the colon will stop flashing.
You can set either12 hour clock or 24 hour clock.
In the following example I will show you how to set the time for 14:35 when using the 24 clock. Make sure that you have removed all packaging from your oven.
Make sure that you have correctly installed your oven as described earlier in this book.
Press STOP/CLEAR.
Press CLOCK once.
(If you want to use a 12 hour clock, Press CLOCK once more. If you want to change different option after setting clock, you have to unplug and plug it back in.)
Press 10 MIN fourteen times.
Press 1 MIN three times.
Press 10 SEC five times.
If the key (10 MIN / 1 MIN / 10 SEC) is pressed and held, the time will increase rapidly.
Press CLOCK to set the time.
The clock starts counting.
6
