- 16 -
5. Method of Tool Option setting
5.1. Press ADJ Key in the Adjust remocon.
5.2. Select "Tool Option1 and 2" by using (CH+/-) key,
and Press Number Key.
5.3. Model Table.
5.4. After changing, push the EXIT Key.
6. ADC Calibration
* Before adjusting White-balance , the AV ADC should be
done.
* Caution : -System control RS-232 Host should be "PC" for
adjustment.
- Before AV ADC Calibration, execute the "Panel
size selection" (only LCD model)
6.1. Adjustment of AV
- Mandatory point : All models are adjusted PAL in AV
mode
* Required Equipments
Remote controller for adjustment.
MSPG-925FS Pattern Generator (Which has
Video Signal: 7 Color Bar Pattern shown in Fig. 1).
- Model : 202 / Pattern : 65
PAL-BGDHI (composite signal)
6.1.1 Method of Auto AV Color Balance(PAL_BGDHI).
1) Input the Video Signal: 7 Color Bar signal into AV3.
2) Set the PSM to Dynamic mode in the Picture menu.
[Fig.1]
3) Press IN-START key on R/C for adjustment.
4) Press the (Vol.+) key to operate the set, then it
becomes automatically.
5) After downloading complete, the ‘OK’ word
appears.
6) Auto-RGB OK means the adjustment is completed.
6.2. Adjustment of Component
* Required Equipments
Remote controller for adjustment.
MSPG-925FS Pattern Generator. (Which has
720p/50Hz YPbPr output Pattern shown in Fig. 2)
-> Model : 215 / Pattern : 65
6.2.1 Method of Auto Component Color Balance
1) Input the Component 720p/50Hz 7 Color
Bar(MSPG-925FS model:215, pattern:65) signal
into Component.
2) Set the PSM to Dynamic mode in the Picture menu.
[Fig.2]
3) Press the IN-START key on R/C for adjustment.
4) Press the (Vol.+) key to operate the set , then it
becomes automatically.
5) After downloading complete, the ‘OK’ word
appears.
6) Auto-RGB OK means the adjustment is completed.
6.3. Adjustment of RGB
* Required Equipments
Remote controller for adjustment.
MSPG-925FS Pattern Generator
(Which has XGA [1024*768] 60Hz 1/2 black &
white pattern shown in Fig. 3)
6.3.1 Method of Auto RGB Color Balance
1) Input the PC 1024x768 @ 60Hz 1/2 black & white
pattern (MSPG-925FS, Model:3, Pattern:65) into
RGB. (using D-sub to D-sub cable)
2) Set the PSM to Dynamic mode in the Picture menu.
Model name Tool Option1 Tool Option2
37LF65 2320 1701
42LF65 2324 1701
47LF65 2328 1701
37LY95 2384 1701
42LY95 2391 1701
47LY95 2395 1701
ADC AV Component RGB-PC
MSPG925FS PAL Model:215 (720P)
INPUT SELECT AV3 Pattern:65 Model: 3
Model:202(PAL-BGDHI) *720P/50Hz
(1024*768 60Hz)
7 Color Bar Pattern: 65
Pattern: 65
*PAL 7 Color Bar
Downloaded From TV-Manual.com Manuals