- 18 -
5) When the R/G/B GAIN is 80 on OSD, it is the FULL
DYNAMIC Range of the Module. In order to control white
balance without the saturation of FULL DYNAMIC Range
and DATA, one of R Gain / G Gain / B Gain should be
kept on 80, and other two is controlled lowering from 80.
* Color Temperature: Cool, Medium, Warm
1. When R GAIN is set to 80
- Control G GAIN and B GAIN by lowering from 80.
2. When B GAIN is set to 80
- Control R GAIN and G GAIN by lowering from 80.
3. When G GAIN is set to 80
- Control R GAIN and B GAIN by lowering from
192.
One of R Gain / G Gain / B Gain should be kept on
80, and adjust other two lower than 80.
(When R/G/B GAIN are all 80, it is the FULL
DYNAMIC Range of Module)
8. Set Information(Serial No & Modelname)
1) Setting up like bottom figure(After setting white balance,
this is set)
(Setting: Press ADJ Key in the Adjust remocon.
Select "System Control 2" by using /(CH+/-) key,
and press (ENTER)
Using Adjust remocon, RS-232 Host & Baud Rate &
Download value change)
Downloaded From TV-Manual.com Manuals