LG Electronics MP03-VDLPM Model No, 1030 1162 419 1092, 45 1/4 67 1/4 47 1/2 19 3/8 33 5/8

FIREPLACE FRAMING SPECIFICATIONS

Framing should be constructed of 2 x 4 or larger lumber.

BD

C

1/2 A

A

Inches (mm)

Figure 9 Framing

10-1/2			Model No.		A	B	C	D
(267)
			MPLDV30	in.	30 9/16	40 3/4	16 1/2	38
				mm	786	1035	419	965
				in.	35 9/16	40 3/4	16 1/2	38
	*7		MPLDV35
5-1/8	(178)			mm	903	1035	419	965
		**12-1/8
(130)				in.	40 9/16	45 3/4	16 1/2	43
		(308)	MPLDV40
				mm	1030	1162	419	1092
			MPLDV45	in.	45 9/16	45 3/4	16 1/2	43
				mm	1157	1162	419	1092

*9" (229 mm) For MPLDV-35, 40 & 45 **14-1/8" (359 mm) For MPLDV-35, 40 & 45

C is the required framing depth

dimension when the finish material (drywall) thickness is 1/2 in. (13mm).

Model No.		A	B	C	D	E
MPLDV30	in.	30 1/4	52 1/4	37	14 7/64	26 1/8
	mm	768	1327	940	358	664
MPLDV35	in.	35 1/4	57 1/4	40 1/2	15 7/8	28 5/8
	mm	896	1454	1029	403	727
MPLDV40	in.	40 1/4	62 1/4	44	17 5/8	31 1/8
	mm	1022	1581	1118	448	791
MPLDV45	in.	45 1/4	67 1/4	47 1/2	19 3/8	33 5/8
	mm	1149	1708	1207	492	854

Note: The appliance 45° collar can be rotated about its axis to align for corner installation. Remove interfering corner spacer. This spacer is used for shipping only.

b

*D

7 (178)

May Be	*C	May Be
Removed	a	Removed

*E

A

*B

Back wall of chase/enclosure (including any finishing materials)

8

	Note-	*These dimensions occur when one 45 degree elbow	Inches
	Venting requirements for corner installations - the horizontal vent length
	“a” to “b,” must not exceed 28 inches (711 mm)	is connected directly to the appliance collar.	(millimeters)
Figure 10	Corner Framing with Square Termination (SV4.5HT-2)

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.