LG Electronics NL-7005 BN, NL-7000 AC manual LA GARD Locks BV, Generally

LA GARD Locks BV

E-mail: info@lagard.nl Internet: http://www.lagard.nl

Kantooradres:	Postadres:
Vlijtstraat 40	Postbus 127
NL-7005 BN Doetinchem	NL-7000 AC
H.R. te Arnhem nr: 09087869	Tel: (+31) 314 376 876
BTW nr: NL 8038.72.987.B01	Fax: (+31) 314 376 878

OPERATING INSTRUCTIONS LG 39E Multi User Combogard /Swingbolt

Keypad 3035, 3710, 3750 or 3750K with reading contact Lock 39E

LED

Contact of the audit trail

37503750K

30353710

Generally

Each pressing of a key is confirmed by a signal (an acoustic signal and a LED flash). A valid code is followed by a double signal, an invalid code by a triple signal. After an interval of more than 10-seconds, the already entered part of the code is deleted and the entire sequence has to be re-entered.

Code entering:	Enter the seven-digit numeric code–or a word with 7 characters
a) Operation with parallel code:	a double signal is followed.
(manager mode)	Manager code: 1234567
b) Operation with dual codes:	Six-digit numeric codes or words with six characters.
(must be programmed)	For opening two valid codes must be entered.
	Manager code: 123456 and User ID# 654321
Opening:	Combogard: Enter the code and (after double signal) turn the
	entry clockwise within 3 seconds unto the hold. The lock is open
	and the entry is rotated.
	Swingbolt: Enter the code and (after double signal) turn the
	handle within 3 seconds into the OPEN position.
	If the lock is not opened within 3 seconds, it is automatically
	locked again.
Locking:	Combogard: Turn the entry counter-clockwise unto the hold.
	The lock is automatically closed and the entry stands straight.
	(Check this by trying to turn the entry back again)
	Swingbolt: Turn the handle into the CLOSE position.
	The lock is automatically locked; check this by trying to turn the
	handle into “OPEN” position.

I M P O R T A N T Check the lock to be locked.

Wrong try penalty:	After four invalid codes, the entry is blocked for about 5
	minutes. During this period, the lock signals at 10-second
	intervals. After this time penalty, the entry of every second
	invalid code initiates a new 5 minutes delay period.
	The key pressing is refused with a triple signal.
Change of code:	The user can change its code anytime.
(always with open door)	Enter the code and keep pressed the last number until second
	double signal (LED is on), press the “0” and enter the new code
	(double signal), enter the new code once more for confirmation
	(double signal).
	The new code is now valid. If mistakes are made while
	changing the code or if an interval occurs of more than 10
	seconds, the old code remains valid and the entire sequence
	has to be re-entered.
	Test the new code several times by open door!

LG 39E Combogard EN	1
Revise: 1

Datum: 16-02-05