Configuration Options via Command Line
Log In to the OAT100R and Access the Main Menu
Note: The OAT100R must be connected to an IP network for SSH client access. For direct access to the OAT100R Service Port, use the FTDI
If necessary, consult the system administrator to obtain the current “admin” user password before proceeding. The default admin user password is “Password4Partners”
1.Establish communication with the OAT100R using an SSH client or via a direct connection to the OAT100R Service Port.
Once communication is established, you should see a login prompt. (If the login prompt is not automatically displayed, press Enter to refresh the screen.)
2.At the login as: prompt, type admin and press Enter.
3.At the password: prompt, type the admin user password and press Enter.
4. At the Command > prompt, either:
•Press Enter to display the OAT100R Main Menu (see example below).
•Type the desired command and press Enter.
The following sections describe each of the configuration commands.
Note: You can always press Enter at the Command > prompt to display the OAT100R Main Menu.
Example: OAT100R Main Menu
| |
Main Menu |
|
System information | |
info | |
monitor | System monitor |
map | System program map |
tuner | Tuner Menu |
setup | Setup Menu |
update | Update Menu |
reset | System reset |
exit | End session |
Command > |
|
39 |