Configuration Options via Command Line (Cont.)
Tuner Menu Commands
The following subsections describe how to access and use the Tuner Menu commands.
Access the Tuner Menu
1.Log in to the OAT100R as described on page 39.
2.At the Command > prompt, type tuner and press Enter.
3.At the Enter Tuner number [0] > prompt, type the number of the OAT100R
The system identifies the current tuner and then displays a Tuner command prompt, for example:
Current Tuner:
4. At the Tuner Command > prompt, either:
•Press Enter to display the Tuner Menu (see example below).
•Type the desired command and press Enter.
Note: You can always press Enter at the Tuner Command > prompt to display the Tuner Menu.
Example: Tuner Menu
| |
Tuner Menu |
|
Change Tuner | |
tuner | |
info | Tuner info |
monitor | System monitor |
map | System program map |
channel | Set channel |
prog | Select programs |
output | Output stream |
on | Turn Tuner On |
off | Turn Tuner Off |
reset | Reset Tuner |
exit | Return to the main menu |
42 |