Configuration Options via Command Line (Cont.)
Exit the Tuner Menu
At the Tuner Command > prompt, type exit and press Enter to exit the Tuner Menu and return to the OAT100R Main Menu Command > prompt.
Setup Menu Commands
The following subsections describe how to access and use the Setup Menu commands.
Access the Setup Menu
1.Log in to the OAT100R as described on page 39.
2.At the Command > prompt, type setup and press Enter.
3. At the Setup Command > prompt, either:
•Press Enter to display the Setup Menu (see example below).
•Type the desired command and press Enter.
Note: You can always press Enter at the Setup Command > prompt to display the Setup Menu.
Example: Setup Menu
| |
Setup Menu |
|
System information | |
info | |
monitor | System monitor |
map | System program map |
omode | Set output mode |
pid | System PID configuration |
proidiom | Pro:Idiom configuration |
setip | Control port IP configuration menu |
rf | RF output configuration |
scan | Scan RF channels |
ipout | IP output configuration menu |
tz | Timezone setup |
time | Time setup |
pwd | Change password |
tundiag | Tuner Diagnostic |
location | Location description |
exit | Return to the main menu |
reset | System reset |
Setup Command >
48 |