13
Operation
4
Operation

Basic Operations

1. Insert the disc by Pressing Z (Open/Close)
or connect the USB device to the USB port.
2. Select the CD or USB function by pressing
FUNCTION.
3. Select a le (or track) you want to play by
pressing . or >.
To Do this
Stop Press x
Playback Press B/X
Pause Press B/X
Skipping to
the next/
previous track/
le
During playback, press .
or > to go to the next
track/le or to return to the
beginning of the current
track/ le.
Press . twice briey to
step back to the previous
track/ le.
Searching for a
section within
a track
Press and hold . or >
during playback and release
it at the point you want to
listen to.
Playing
repeatedly or
randomly
Press REPEAT on the
remote control repeatedly,
the display change in the
following order, RPT 1 p RPT
DIR (only MP3/ WMA) p RPT
ALL p RANDOM p OFF.

Other Operations

Programmed Playback

The program function enables you to store
your favourite les from any disc or USB device.
A program can contain 20 tracks.
1. Insert a CD or USB and wait for it to be
order.
2. Press PROGRAM/MEMO. on the remote
control in stop status.
3. Press . or > on the unit or on the
remote control to select a track.
4. Press PROGRAM/MEMO. again to save and
select a next track.
5. Press B/X to play the programmed music
les.
6. To clear your selection, press x,
PROGRAM/MEMO. and then x.
NOTE
The programs are also cleared when the disc or
USB device is removed, the unit is switched to
power o or the function is switched to others.
4Operation
RAT375-A0U_DPANLLK_ENG_4608.indd13 13 2010-02-25 ¿ÀÀü 10:44:44