English
Turntable
After pressing PHONO (with the remote control mode selector set to “AUDIO/TV/VCR”), you can perform the following operations on a turntable:
PLAY: | Starts playing. |
STOP: | Stops operations. |
Cassette deck
After pressing TAPE/MD or TAPE CONTROL (with the remote control mode selector set to “AUDIO/TV/VCR”), you can perform the following operations on a cassette deck:
PLAY: | Starts playing. |
1: | Fast winds the tape from right to left. |
Á: | Fast winds the tape from left to right. |
STOP: | Stops operations. |
PAUSE: | Pauses playing. To release it, press PLAY. |
¦REC: Press this button with the PLAY button to start recording.
Press this button with the PAUSE button to enter recording pause.
MD recorder
After pressing TAPE/MD or TAPE CONTROL (with the remote control mode selector set to “AUDIO/TV/VCR”), you can perform the following operations on the MD recorder:
PLAY: | Starts playing. |
4: | Returns to the beginning of the current (or previous) |
¢: | track. |
Skips to the beginning of the next track. | |
STOP: | Stops playing. |
PAUSE: | Pauses playing. To release it, press PLAY. |
¦REC: Press this button with the PLAY button to start recording.
Press this button with the PAUSE button to enter recording pause.
VCR
You can always perform the following operations (with the remote control mode selector set to “AUDIO/TV/VCR”):
VCR POWER: Turns on or off the VCR.
After pressing VCR or VCR CONTROL (with the remote control mode selector set to “AUDIO/TV/VCR”), you can perform the following operations on the VCR:
1 – 9, 0: | Selects the TV channels on VCR. |
PLAY: | Starts playing. |
1: | Rewinds a tape. |
Á: | Fast winds a tape. |
STOP: | Stops operations. |
PAUSE: | Pauses playing. To release it, press PLAY. |
¦REC: Press this button with the PLAY button to start recording.
Press this button with the PAUSE button to enter recording pause.
CHANNEL
Note:
You can use either VCR button or the VCR CONTROL button to activate the buttons listed above. If you press VCR, the playing source also changes. On the other hand, if you press VCR CONTROL, the playing source does not change.
DVD player
After pressing DVD (with the remote control mode selector set to “AUDIO/TV/VCR”), you can perform the following operations on a DVD player:
PLAY: | Starts playing. |
4: | Returns to the beginning of the current (or previous) |
¢: | track. |
Skips to the beginning of the next track. | |
STOP: | Stops playing. |
PAUSE: | Stops playing temporarily. To release it, press PLAY. |
Note:
You can use either TAPE/MD button or the TAPE CONTROL button to activate the buttons listed above. If you press TAPE/MD, the playing source also changes. On the other hand, if you press TAPE CONTROL, the playing source does not change.
IMPORTANT:
To operate JVC’s video components using this remote control:
After pressing DVD, these buttons can be used for the DVD menu
operations.TEST
4
Note:
For detailed menu operations, refer to the instructions supplied with the discs or the DVD player.
CNTR
2 
3
MENU
REAR•L
5 | 6 |
ENTER
REAR•R
8
•You need to connect JVC video components through the AV COMPU LINK terminals (see page 39) in addition to the connections using cables with RCA pin plugs (see page 7).
•Some JVC VCRs can accept two types of the control signals
— remote code “A” and “B.” Before using this remote control, make sure that the remote control code of the VCR connected to the VCR jacks is set to code “A.”
•When using the remote control:
– For the DVD player and VCR operations, aim the remote control directly at the remote sensor on each component, not on the receiver.
– For the TV operations:
7 If the TV having the AV COMPU LINK terminal “RECEIVER/AMP,” aim the remote control directly at the remote sensor on the receiver.
7 If the TV having the AV COMPU LINK terminal “AV COMPU LINK EX,” aim the remote control directly at the remote sensor on the TV.
TV
You can always perform the following operations (with the remote control mode selector set to “AUDIO/TV/VCR”):
TV/CATV/DBS POWER: Turns on or off the TV.
TV VOL
TV/VIDEO: Sets the input mode (either TV or VIDEO).
After pressing TV/DBS (with the remote control mode selector set to “AUDIO/TV/VCR”), you can perform the following operations on a TV:
CHANNEL
1 – 9, 0, 100+: Selects the channels.
RETURN: Alternates between the previously selected channel and the current channel.
42
