Using the SEA Modes
The SEA (Sound Effect Amplifier) modes give you control of the way your music sounds. | ||||||
IMPORTANT: |
|
|
|
|
|
|
|
|
|
|
| Creating Your Own SEA Mode | |
When using the remote control, check to see if its |
|
|
|
|
| |
|
|
|
|
|
| |
remote control mode selector is set to the correct | TV/VCR | You can adjust and store your own SEA adjustment into memory | ||||
position: | AUDIO/ |
| ||||
|
|
|
|
| (SEA USERMODE). | |
|
|
|
|
| ||
To operate this receiver, set it to “AUDIO/TV/ | CATV/DBS |
|
|
|
| |
|
|
|
|
| ||
VCR” (except when selecting the DBS tuner as |
|
| Before you start, remember... | |||
|
|
|
|
| ||
|
|
|
|
| ||
the source). |
|
|
|
|
| |
|
|
|
|
|
| |
English
Selecting Your Favorite SEA Mode
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
On the front panel ONLY:
On the front panel:
Press SEA MODE repeatedly until the SEA mode you want appears on the display.
SEA MODE
If you do not want to store your adjustment, but rather want to adjust the SEA temporarily, skip step 4 below.
1. Press SEA ADJUST repeatedly | SEA ADJUST |
|
•Each time you press the button, the SEA mode changes as follows:
SEA ROCK
SEA MUSICAL
SEA MOVIE 
SEA COUNTRY
SEA OFF 
SEA USERMODE 
SEA JAZZ 
SEA ROCK:Gives a heavy sound. Both high and low frequencies are boosted.
SEA MUSICAL: Enhances the
SEA MOVIE: Adds breadth to sounds so you feel like you are in a movie theater.
SEA COUNTRY: Enhances the
SEA JAZZ:Gives a feeling of a live atmosphere. Good for acoustic music.
SEA USERMODE: Your original SEA adjustment (see the right).
SEA OFF:No SEA mode is applied (see below).
Notes:
•The SEA modes cannot be used for recording.
•When the SEA mode is turned on, the SEA indicator lights up on the display.
•When the SEA mode is used with the DAP mode (see page 23), sounds may be distorted. If this happens, turn off the DAP mode or decrease the effect level of the DAP mode.
To cancel the SEA mode
Press SEA MODE repeatedly until “SEA OFF” appears. The SEA indicator goes off from the display.
From the remote control:
1. | Press SOUND. | SOUND |
| ||
| The 10 keys are activated for sound adjustments. |
|
2. | Press SEA MODE repeatedly until | SEA MODE |
| the SEA mode you want appears | 10 |
| on the display. | RETURN |
To cancel the SEA mode
Press SEA MODE repeatedly until “SEA OFF” appears in step 2 above. The SEA indicator goes off from the display.
until the frequency range (100 Hz, | ||
1 kHz or 10 kHz) you want | ||
appears on the display. | ||
S E A FR |
| |
|
| VOLUME |
100 | 1k | 10k |
S E A FR
VOLUME
100 1k 10k
MULTI JOG
2.Turn MULTI JOG to adjust the SEA level of the selected frequency range.
•Turning it clockwise increases the level.
•Turning it counterclockwise decreases the level.
This FR means this adjustment can be applied to the front speakers only.
S E A FR
100 1k 10k
3.Repeat step 1 and 2 to adjust other frequency ranges if necessary.
4. Press TUNER/SEA MEMORY. | TUNER/SEA MEMORY |
|
Your adjustment is stored into the SEA
USERMODE.
To recall your own SEA adjustment
Press SEA MODE repeatedly until “SEA USERMODE” appears.
To erase a stored adjustment
Storing a new adjustment into SEA USERMODE erases the previously stored one.
19
