LG Electronics RD-JT30 1024X768 XGA, RD-JT31 800X600 SVGA manual Maintenance, Lamp Information

Models: RD-JT31 800X600 SVGA RD-JT30 1024X768 XGA

1 29
Download 29 pages 8.51 Kb
Page 24
Image 24
MAINTENANCE

MAINTENANCE

Lamp Information

Use and Replacement of the Lamp

The lamp life is 1500 hours. When the Power Indicator lights up red and the Lamp Indicator lights up orange or a message appears suggesting the time of lamp replacement, please install a new lamp or consult your dealer. An old lamp could cause a malfunction in the projector and in rare instances may even explode.

Lamp Replacement

Please check with LG service center for the information of lamp replacement.

Lamp Information Caution

HIGH VOLTAGE/ HIGH TEMPERATURE/ HIGH PRESS

WHEN REPLACING THE LAMP, TURN OFF THE PROJECTOR AND PULL OUT THE CORD FROM THE RECEPTACLE BEFORE REPLACING THE LAMP.

WAIT UNTIL THE LAMP BECOMES COOL (MINIMUM 45 MINUTES).

TOUCHING THE LAMP WHEN IT IS HOT MAY CAUSE A BURN ON YOUR HAND.

HIGH-PRESSURE LAMP WHEN HOT MAY EXPLODE IF IMPROPERLY HAN- DLED.

To reduce the risk of injuries to fingers and damage to internal compo- nents, use caution when removing lamp glass that has shattered into sharp pieces.

To reduce the risk of injuries to fingers and/or compromising image quality by touching the lens, do not touch the empty lamp compartment when the lamp is removed.

This lamp contains mercury. Consult your local hazardous waste regula- tions to dispose of this lamp in a proper manner.

20

DLP Personal Projector

Page 24
Image 24
LG Electronics RD-JT30 1024X768 XGA, RD-JT31 800X600 SVGA manual Maintenance, Lamp Information