LG Electronics RD-JT31 800X600 SVGA, RD-JT30 1024X768 XGA manual Shutdown

Shutdown

1.Press POWER and a warning message will appear. To turn off the projector, press POWER again.

POWER	SOURCE
AUTO	BLANK

POWER

SOURCEMENU

2.To cool down the projector, the fan will continue to run for approximately 90 seconds, during which the LED will flash.

*After the projector is turned off, there is a 90-second cooling period before the projector can be re-started.

3.Disconnect the power cord from the wall socket.

(110V)(220V)

Caution

•Please do not unplug the power cord before POWER is shut down or during the two-minute cooling process.

•If the projector is not properly shut down, to protect the lamp, the sys- tem will detect this and cool the lamp for 90 seconds automatically before turning on again.

DLP Personal Projector

19