Installation
External Equipment Connections
- This manual mainly explains the features for the
Antenna Connection
- For optimum picture quality, adjust antenna direction.
Connecting to an Inside Antenna Setup
-Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below. (Use the correct type of antenna cable for the type of wall antenna jack.)
Turn clockwise to tighten.
PC INPUT | ANT IN |
Bronze Wire | +75 Ω |
| 75Ω Round Cable |
|
|
| Antenna |
| 300Ω Flat Wire | Converter |
Apartment Buildings | Wall Connection Jack | Antenna Jack |
|
- If you have a 75Ω round cable, insert the bronze wire and then tighten the connection nut. If you have a 300Ω flat wire, connect the twisted wire to the antenna converter and then connect the converter to the antenna jack on the TV.
- If using 75Ω round cable, do not bend the bronze wire. It may cause poor picture quality.
Connecting to an Outdoor Antenna Setup
- This type of antenna is commonly used in single family dwellings.
| VHF Antenna |
|
|
|
|
|
|
| Turn clockwise to tighten. |
|
|
|
|
|
| PC INPUT | ANT IN |
|
|
|
|
| +75 Ω |
| UHF |
|
|
|
|
| Antenna | 75Ω Round Cable | Bronze Wire |
|
|
|
|
|
|
| |
|
| 300Ω Flat Wire |
|
|
|
| Single Family Home |
| Antenna | Antenna Jack | |
|
|
|
| ||
|
|
| Converter |
|
|
- | In poor signal areas, to get better picture quality, install a |
|
|
| |
| signal amplifier to the antenna as shown to the right. |
|
|
|
|
- | If signal needs to be split for two TVs, use an antenna | VHF | UHF |
|
|
| signal splitter for connection. | PC INPUT | +75 Ω | ||
|
|
|
| ANT IN | |
Signal
Amplifier
11
