Installation
PC Setup
- After setup, be sure to select
Connections
1. | Set the monitor output resolution on the PC before |
|
|
|
| |
| connecting to the TV. |
|
|
|
| |
2. | Connect the TV to the PC with the PC cable. | VIDEO (MONO) L | AUDIO R | PC PC INPUT | ANT IN | |
3. | Connect the PC audio output to the TV's PC SOUND | SOUND | +75 Ω | |||
|
| |||||
VIDEO IN |
|
|
|
input.
Viewing Setup
1. Turn on the PC.
2. Use the tv/video or multimedia button on the remote control to select
Monitor Display Specifications
Resolution | Horizontal | Vertical | Resolution | Horizontal | Vertical | |
Frequency(KHz) | Frequency(Hz) | Frequency(KHz) | Frequency(Hz) | |||
|
| |||||
|
|
|
|
|
| |
| 31.4 | 60 | 832x624 | 49.7 | 75 | |
| 35 | 67 |
|
|
| |
640x480 |
| 48.3 | 60 | |||
37.5 | 75 |
| 56.4 | 70 | ||
| 1024x768 | |||||
|
|
|
|
| ||
| 43.2 | 85 |
| 60 | 75 | |
|
|
|
|
|
| |
| 35.1 | 56 |
| 68.6 | 85 | |
| 37.8 | 60 |
|
|
| |
| 1280x768 | 39.5 | 50 | |||
800x600 | 48 | 72 | 47.6 | 60 | ||
| ||||||
| 46.8 | 75 |
|
|
| |
|
|
|
| |||
| 53.6 | 85 |
|
|
| |
|
|
|
|
|
|
NOTES
a. For optimum picture quality, use standard XGA (1024x768) computer output at a 60Hz refresh rate. Using other formats (VGA, SVGA, etc.) or refresh rates may result in reduced picture quality. (To change the computer video output format, please refer to the operating manual for the computer you are using).
b. If the message “Out of range” appears on the screen, adjust the PC output to a format listed in the ‘Displayable Monitor Output Format Specifications' chart above.
c. The synchronization input form for Horizontal and Vertical frequencies is separate.
DPM (Display Power Management) mode
If the PC goes to power saving mode, the monitor automatically switches to DPM mode.
DPM mode may not work if you don’t use the PC cable provided.
14
