Technical Parameters, Setup / Technicals, Parameters/Setup

B2520 / B2540

Technical Parameters

As delivered your machine is preset by default. However, you may adjust it to meet your requirements by resetting the technical parameters.

To set the technical parameters:

1Select the desired parameter and confirm with OK.

2 With the keys		or	,	modify	the	parameter
settings by following the table below and press OK.
Parameter			Signification



1 - Scanning mode	Default value of the scan mode
	resolution for the documents to be
	transmitted.

2 - TX header	If this parameter is on, your header
	will appear on all documents sent
	to your subscribers with your name,
	number, date and number of
	pages.
	Warning: If you send a fax from the
	document loader, the transmission
	header will not appear on the
	document			your	correspondent
	receives.

3 - TX speed	Transmission speed for					outgoing
	documents.
	For a quality telephone line
	(compatible,				no		echo),
	communications				occur		at
	maximum speed.
	However, it may be necessary to
	restrict the transmission speed for
	some calls.

4 - Echo protect	If this parameter is on, the on-line
	echo will be reduced during long
	distance calls.

6 - EPT mode	For some long distance calls
	(satellite), the on-line echo may
	disturb the call.

7 - COM. display	Choice		between		transmission
	speed displayed or number of the
	page in progress.

8 - Eco energy	Choosing the printer standby delay:
(ECO)	the printer will switch to standby
	after a delay (in minutes) of NON-
	operation or during the period of
	time of your choice.

Parameter		Signification


10 - RX header	If this parameter is on, all
	documents received by your fax will
	include	the subscriber’s		header
	with his name, number (if available)
	fax print date and the page number.

11 - RX speed	Transmission speed for incoming
	documents.
	For a quality telephone line
	(compatible,		no	echo),
	communications		occur	at
	maximum speed.
	However, it may be necessary to
	restrict the transmission speed for
	some calls.

12 - Rings	Number of rings to automatically
	start your machine.

13 - Discard size	The Discard Size parameter only
	defines the printing of received
	faxes . The number of lines of a
	document can be too high for the
	printing	paper	format.	This
	parameter defines		the threshold
	beyond which the extra lines are
	printed on a second page. Bellow
	this threshold, extras lines are
	deleted.
	If you choose With, the threshold
	is set on 3 centimeters.
	If you choose Without, the
	threshold is set on 1 centimeter.

20 - E.C.M.	This parameter helps correct the
	calls made on disturbed telephone
	lines. It is used when the lines are
	weak or	too noisy. Transmission
	times may be longer.

25 - TEL Impedance	This parameter lets you choose
	between a complex impedance and
	a 600 Ohm impedance, depending
	on the telephone network your
	terminal is connected to.

73 - Improve rep @	This	parameter	lets	you
	automatically register the Internet
	address of your subscribers fax
	during a call (if available).

6 - Parameters/Setup

- 26 -