Assembling the speaker stand to the speaker
Before connecting the speakers, assemble the speaker stand to the speaker as illustrated.
Speaker System Connection
Connect the speakers using the supplied speaker wires.
To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.).
1
Post
Base
2
Hole 1. Fix the post to the base by rotating the
post. And Draw the speaker cord through
the hole on the base.
2. Draw the speaker cord through the hole on the speaker.
Front speaker |
| Front speaker |
(Right) |
| (Left) |
Center speaker
3 | 3. Fix the speaker to the | |
stand by rotating the | ||
| ||
| speaker. Connect the | |
| speaker cord to the | |
| appropriate terminals | |
| on the speaker. |
Notes:
Do not catch the speaker cord between the speaker and the post.
Do not drop the speaker when mounting.
|
| Rear speaker | |
Rear speaker | |||
| (Left surround) | ||
(Right surround) |
| ||
|
| ||
|
|
|
Subwoofer
Notes:
Be sure to match the speaker wire to the appropriate terminal on the components: + to + and
–to
If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.
10
