Cloning Procedures (Cont.)

(Continued from previous page)

3.If the Master STB Setup contains a TV Zone # and/or a Wi-Fi Zone # assignment, make sure to assign the same Zone designation(s) in the Target STB at this time. See Reference section, “Using the STB’s Zoning Features,” for further information.

Note: In order for the proper location-specific TV Zone and/or Wi-Fi Zone profile data to be applied, the Zone designation(s) must be assigned in the Target STB(s) BEFORE Teaching is performed.

4.Insert the USB memory device with the TLX file into either of the USB ports on the Target STB.

5.Press MENU on the Installer Remote to display the STB setup menus. Use the arrow navigation keys to select/highlight the Option menu icon, and then press the number “7” key a total of seven times to display the USB Download Menu.

6.With the USB Download Menu on display, use the Up/Down arrow keys to select Teach To STB (TLX), and then press OK.

7.In the Teach To STB (TLX) window, use the Up/Down arrow keys to select the Master STB Setup you want to install.

Note: Filenames for TLX files Learned from an STB are comprised of the STB model and a five-digit number, for example, STB-2000-UA00003.TLX.

8.Press OK when you are ready to initiate the Teaching process.

Teaching status will be shown on a progress bar in a new window. Do NOT remove the USB device until Teaching is complete. When the Teaching process is complete, a “Teaching Completed” window will briefly appear on the screen and the USB Download Menu will be exited.

9.Remove the USB memory device, and verify that the Master STB Setup is now resident on the Target STB.

After the Teaching process is complete, the STB tunes according to the setting of Installer Menu item 004 STRT CHANNEL (Start Channel). If a Start Channel is specified, the STB will tune to that channel; otherwise, the STB will return to the last channel tuned.

USB Download Menu

Upgrade STB Software

Upgrade PTC Software

Diagnostics

Teach To STB (TLL)

Teach To STB (TLX)

Previous

OK

Note: The Diagnostics option in this menu is for service use only.

Teach To STB (TLX)

STB-2000-UA00003.TLX

Previous

OK

Teach To STB

UPDATING...

50%

Do not unplug!

42

206-4256