74
Operation
Using the virtual keyboard
On the virtual keyboard, there are two input modes for the entering a character. Press the yellow (Y) coloured button to toggle the display between keyboard mode and keypad mode.
Keyboard Mode
Use U/u/I/i to select a letter on the screen, and press ENTER (
) to confi rm your selection.
Keypad Mode
This mode allows you to enter letters by pressing the buttons on the remote control. Press the buttons with the required letter once, twice, three or four times until the letter is displayed.
4
Operation
[Cancel] – Return to the previous screen.
[Space] – Inserts a space at the cursor position.
[Backspace] – Deletes the previous character at the cursor position.
[ABC / abc /
Press CLEAR to clear all entered characters.
To enter a letter with an accent mark:
1.Select a letter using U/u/I/i on the virtual key board.
2.Press INFO/DISPLAY (
) to display the extended character set.
3.Use I/i to select a character then press ENTER (
).
Available languages to enter on the keyboard mode are as follows: English, Spanish, Italian, French, German, Dutch, Portuguese, Swedish, Polish and Czech.
Button | Operation |
|
|
CLEAR | Deletes the previous character |
| at the cursor position. |
|
|
REPEAT | Inserts a space at the cursor |
| position. |
|
|
m/M | Change the character set of |
| the remote control |
| 123, ABC or abc) |
|
|
NOTE
The keypad mode is available only in the [YouTube] and [Picasa Web Albums] features.
10. 10. 06 11:07 |
