Installation 25
Speaker Connection
Wireless connection
When you turn on the unit, subwoofer and wireless receiver the connection will be completed automatically.
When the connection is completed, you can see the icon on the display window.
LED indicator of wireless receiver
LED Color | Operation |
Blue | The wireless receiver is |
| receiving the signal of the |
| wireless transmitter. |
|
|
Red | The Wireless Receiver is in |
| standby mode. |
|
|
Off | The Wireless Receiver is |
(No display) | turned off. |
|
|
NOTE
•If the wireless connection fails again, check whether there is any confl ict or strong interference (for example, interference from other electronic devices) around your location. After removal of the confl ict or strong interference, repeat the above procedures.
•The available length is 20 m for wireless connection on open place.
NOTE
•If there is a strong electromagnetic wave product nearby, interference may occur. Put the unit (Wireless Receiver and main unit) away from there.
•Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to
•It takes a few seconds (and may take longer) for the Wireless Transmitter and Wireless Receiver to communicate with each other.
Wireless connection for manually
You can set up wireless connection manually, when your connection is not completed. Refer to the “Connect wireless speakers” on page 42.
3
Installation
10. 10. 06 11:07 |
