LG Electronics W2346S manual MODE Button, AUTO Button, INPUT Button, Power Indicator, RATIO menus

Control Panel Functions

MODE Button	Use this button to enter F-ENGINE, ORIGINAL
	RATIO menus.
	For more information, refer to page 20.
AUTO Button	AUTO IMAGE ADJUSTMENT
	When adjusting your display settings, always press the
	AUTO button before entering the On Screen
	Display(OSD). (Only Analog Mode)
	This will automatically adjust your display image to the
	ideal settings for the current screen resolution size
	(display mode).
	The best display mode is
	W1946S/W1946SN/W1946T/W1946TN : 1360 x 768
	W2046S/W2046T : 1600 x 900
	W2246S/W2346S/W2246T/W2346T : 1920 x1080

INPUT Button

(SOURCE Hot key)

When two input signals are connected, you can select the input signal (D-SUB/DVI) you want. When only one signal is connected, it is automatically detected. The default setting is D-Sub.

(Only W1946T/W1946TN/W2046T/W2246T/W2346T )

EXIT Button Exit the OSD(On Screen Display).

Power Button & Use this button to turn the display on or off.

Power Indicator

The power indicator stays white if the display is running properly (On Mode). If the display is in Sleep Mode (Energy Saving), the power indicator is blinking white.

13