Magenta XR2000 setup guide Video Adjustment, Magenta Multiview Series

MAGENTA MULTIVIEW™ SERIES

3.4 Video Adjustment

3.4.1 Cable Distance Compensation Settings

In order to get the highest quality video signals from your MultiView CAT5 Video System , please follow the instructions and diagrams below:

An Image Adjustment Utility is available for download from: http:// www.magenta-research.com/test

Simply open in any image browser on a computer.

If the image file can not be downloaded, use a utility to draw a black box on a white background.

NOTE: TURN KNOB SLOWLY DURING ADJUSMENT PROCEDURE. Turning too

fast may result in missing the proper EQ setting resulting in picture loss.

To Reset EQ and Skew values to 0, remove power from XR2000, Push and hold

EQ/Skew Knob in and re-apply power.

1.Push EQ/Skew knob in once so that all three RGB LED’s are on with red, green, and blue colors.

2.Turn the EQ/Skew knob clockwise until the shadow next to the black box just disappears. The brightness in the white area should be the same as the white area above and below the black box. The Cable Length LED’s will turn on for indicated cable distances. Starting from zero feet to 1,000 and above may take some time. Please continue turning the knob for best picture quality.

3.Press and release EQ/Skew knob until RGB LEDs are all off.

Adjust

Knob

LEDs for
Skew adjust-
	Cable length
ment
	LEDs

Figure 3-9: Adjustment locations

Figure 3-4: Image Adjustment Utility—Cable Length EQ

108