absolute fidelity
Genesis servo-bass amplifier. To do this, we have created an online profile# for you to use.
Your UserID is Genesis2207011 and Password is Genesis
Please visit the Harmony Remote website for support, and to activate and configure your remote.
Bass Control Adjustments
Your servo-bass amplifier should be the last thing you turn on in your system, and the first thing you turn off. As a general rule, turn your system on starting at the source to the amplifiers, and turn it off starting at the amplifiers back to the source.
If the remote is not already set-up to control the Servo- Bass Amplifier, press the [Devices] button on top, and select Amplifier on the screen by pressing the button next to it. Plug the woofer amplifier into a power outlet*, and using the remote control, turn it on by pressing the OK button. The display on the Control Module shows on .
When you make any adjustments, the display flashes to identify the function that is being adjusted.
The bass volume or gain is controlled with the Ch. + and – buttons. (The Vol + and – buttons are used for your main volume control on your preamplifier.) When you first press one of the volume control buttons, the currently-set volume will flash. The next press will move the volume up or down. Pressing and holding the Ch. + or – buttons will change the volume up or down rapidly.
The bass volume/gain has a range of 0 to 100. A volume setting of around 40 is nominal1 for normal sized rooms. That is a
#If you have managed to let us know ahead of time what the rest of your system is, it might even be possible for us to pre-program the remote for you.
*Do NOT use any power conditioners with the Genesis Servo-Controlled Bass Amplifier. We have found that every power conditioner that we have tried will restrict the dynamics of the system – except the Titan by IsoTek Systems.
1This assumes that the standard SBI is used to interconnect the Control module to the midrange/tweeter towers.
