Genesis Advanced Technologies 2.2 manual absolute fidelity, The parts of the amplifier are

absolute fidelity

spikes again. This will avoid causing damage to the acoustic suspension and to your floor.

5)While the acoustic suspension is designed for you to be able to use the system on any surface, if you have very light and resonant bare floorboards, you may need to place a heavy slab of marble, slate, or granite under the loudspeaker to avoid exciting the floor.

The Servo-Controlled Bass Amplifier

The included remote-controlled modular Servo-Controlled Bass Amplifier powers the woofer towers of the G2. There are three modules, an acoustic suspension (or amplifier stand) plus a power supply unit and numerous supplied cables in the standard configuration.

The parts of the amplifier are: Genesis 2 Servo-Controlled Bass Amplifier

1)The electronic crossover and Control Module with left and right balanced inputs and two control outputs.

2)A pair of Control Interface Cables (CIC): these have 7-pin Neutrik™ connectors at each end.

3)A pair of Servo-Bass Interconnects (SBI) with XLR connectors at one end and a pair of banana plugs (or optionally spades) at the other end.

4)Two Servo-feedback Amplifier Modules with one control input, and two Neutrik 50-amp Speakon™ outputs.

5)One Acoustic Suspension system.

6)Two pairs of Servo-Bass Cables (SBC) with Neutrik 50-amp Speakon™ plugs at each end.

7)A single Power Transformer for the Amplifier Modules with two Neutrik™ 20-amp PowerCon™ outlets.

8)A pair of Power Umbilicals with a Neutrik 20-amp Powercon plug at each end (one grey and one blue).

As an optional upgrade, comprising two Maximum Dynamic Headroom Reservoirs and an additional Power Transformer is available. This conveys additional macro- and micro-dynamic

5