![red lettering, and the other in white](/images/new-backgrounds/18936/1893619x1.webp)
absolute fidelity
capabilities to the
In the typical configuration, the Control Module, and two Servo- feedback Amplifiers are placed in a stack between the midrange/ tweeter wings. The Power Supply is placed behind the stack. Using the supplied Power Umbilicals, connect the Power Supply to the two Amplifier Modules.
A word of caution – the Neutrik PowerCon connectors used for linking the power supply to the amplifiers are designed for passing current. They are not designed to make/break current. Hence, be sure to connect the Power Umbilicals before you connect the Power Supply to the wall outlet.
With the optional Maximum Dynamic Headroom Reservoir upgrade, the Control module is placed in the middle, flanked by the two
Using the supplied CIC, link the Control Module to each of the
Use the SBC to connect the woofer towers to the woofer amplifier. Each end of the cable has a pair of 50 amp
AMPLIFIER or SPEAKER. It does not
matter which connector is used as long as the correct amplifier module is used for the left and right towers. It does not matter which SBC is used for the left or the right; however, one is
marked with AMPLIFIER or SPEAKER in
red lettering, and the other in white
6