Magenta XR2000 setup guide Specifications

CHAPTER 1: Specifications.

1. Specifications

Cable Required: Category 5, 5e, 6 shielded or unshielded twisted pair

Compliance: CE; FCC Class A, IC Class A

Video Support: QVGA, VGA, SVGA, XGA, SXGA, UXGA, RGBHV, RGB, Composite (NTSC, PAL, SECAM), S-Video, Component Video, widescreen modes, HDTV modes including 1080p, 1080i, 720p

Resolution and

Refresh Rate: At 2000 ft. (609 m) or less: to 1920x1200

Required Source

Impedance: Video OUT: 75 ohms;

Audio models: Audio OUT (if any): 600 ohms maximum

Required Destination

Impedance: Video IN: 75 ohms;

Audio models: Audio IN (if any): 600 ohms minimum

Audio

Characteristics: Right/Left summed (A option)

XR2000SA/SAP: Full Stereo

Line Level 600 Ohm Unbalanced

Serial

Characteristics: Protocol: Asynchronous; transparent to data format; data rates to 115 kbps simplex, half-duplex modes SA/SAP versions are 3 wire, fixed baud rate of 9600

Connectors:	(1) 4 pin phoenix, (2) RJ-45, (1) HD15 F; (1) DB9M (model
	dependent)
Temperature
Tolerance:	Operating: 32 to 104°F (0 to 40°C);
Humidity	Storage: -4 to +140°F (-20 to +60°C)
Tolerance:	Up to 80% noncondensing
Enclosure:	Steel
Power:	+12 VDC; 1.2 A
	Consumption: 6 watts maximum
Size:	1.2"H x 5.6"W x 6.2"D (3.0 x 14.2 x 15.7 cm)
Weight:	2.0 lb. (0.9 kg)

35