Control Panel Functions

Control

 

Function

Buttons

Use these buttons to select or adjust functions in the On

Screen Display.

 

 

Button

 

For more information, refer to page A19 -A20.

(

)

 

Button

(SOURCE)

Use this button to make either D-Sub,DVI or HDMI connector active. This feature is used when two computers are connected to the display. The default setting is D-Sub.

AUTO/SET Button

Use this button to select an icon in the On Screen Display.

AUTO IMAGE ADJUSTMENT

When adjusting your display settings, always press the AUTO/SET button prior to entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode).

The best display mode is:

W2253V : 1920 x 1080

W2353V : 1920 x 1080

Power Button Use this button to turn the display on or off.

Power Indicator This Indicator lights up as red when the display is operating normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to flicker.

Light Sensor

This is lens for light sensor sletect outside luminance,

 

when setting AUTO BRIGHT ON.

A9

Page 10
Image 10
LG Electronics W2253V, W2353V manual Button For more information, refer to page A19 -A20, Auto Image Adjustment