INSTALLATION INSTRUCTIONS
Install or store unit where it will not be exposed to temperatures below freezing or exposed to outside weather conditions.
Properly ground washer to conform with all governing codes and ordinances. To reduce the risk of electric shock, do not install the washer in humid spaces.
The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings in clean condition at all times.
Damage caused by cockroaches or other vermin will not be covered by the appliance warranty.
■Shipping bolts
The appliance is fitted with shipping bolts to prevent internal damage during transport.
■Removing shipping bolts
ENGLISH
1.To prevent internal damage during transport, 4 locking bolts are installed. Before operating the washer, remove the bolts.
•If they are not removed, it may cause severe vibration, noise, and malfunction.
3.Take out the 4 bolts by twisting the braces slightly. Keep the 4 bolts and the wrench for future use.
•Whenever the appliance is transported, the shipping bolts must be replaced.
2.Unscrew the 4 bolts with the wrench supplied.
cap
4.Close the holes with the caps supplied.
5