IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important safety instructions that should be followed during the installation and maintenance of the UPS. Please read this manual thoroughly before attempting to install or operate this UPS.
WARNING:
To prevent the risk of fire or electric shock, install the UPS in a temperature and humidity controlled room, free of conductive contaminants.
Operate the UPS only from a properly grounded AC supply.
To reduce the risk of electric shock, do not remove the cover, as it has no
To reduce the risk of fire, use the proper rating when replacing the fuse.
CAUTION:
Although your UPS has been designed and manufactured to assure personal safety, improper use can result in electrical shock or fire. To insure safety, please observe the following rules:
Turn off and unplug your UPS before cleaning. Do not use liquid or aerosol cleaners. A dry cloth is recommended to remove dust from the surface of your UPS.
Do not install or operate your UPS in or near water. Do not place UPS on an unstable cart, stand, or table.
Do not place UPS under direct sunlight or close to heat emitting sources. Do not place UPS power cord in any area where it may get damaged by heavy objects.
Follow all warnings and instructions marked on the UPS. Do not attempt to service the UPS, as it has no
ATTENTION:
Turn off and unplug your UPS from the outlet and contact qualified service personnel if:
The power cord or plug is damaged. Liquid has been spilled on the UPS. The fuse blows frequently.
The UPS does not operate even when user follows the operating instructions.
CONDITIONS OF USE: The input receptacle must be within 6 feet (1.8 meters) of the UPS.
Your UPS provides conditioned power to connected equipment. Maximum load must not exceed that shown on UPS rating label. If uncertain, consult your distributor or Liebert.
Placing magnetic storage media on top of the UPS may result in data corruption. This equipment can be operated by individuals without previous training.
2
