MAINTENANCE
The PowerSure Personal UPS requires very little maintenance. The batteries are valve regulated, nonspillable, lead acid, and require that they be kept charged to obtain their designed life. The UPS continuously charges the batteries when connected to the utility supply.
When storing the UPS for any length of time, it is recommended to plug in the UPS for at least 24 hours every four to six months to ensure full recharge of the batteries.
FUSE REPLACEMENT PROCEDURES
Insert flat blade screw driver into slot and pull fuse holder out to remove
AC Inlet
Fuse Holder |
Input Fuse
Spare Fuse
CAUTION: Before changing the supply fuse, turn off the UPS, and unplug the input cord from the AC input power supply and from the UPS.
1.Remove the fuse holder by inserting a flat blade screwdriver into the slot and pulling out as indicated in the figure above.
2.Remove the input fuse.
3.Remove the spare fuse from its position by using the screwdriver to push it out.
4.Place spare fuse in the input fuse position, and replace the fuse holder. The fuse holder will lock into position.
5.Reconnect the input power lead to the UPS, and the input power lead to the input AC supply.
6.Restart the UPS. The UPS is ready for normal operation.
Personal Model # | Fuse Type |
5A / 125V | |
6A / 125V |
6
