Liebherr 7081998-0 Control, Switching on the appliance, 5.1Brightness of the temperature display

Control

WARNING

Fire and overheating hazard!

u Do not use extension cables or multiple socket outlets.

The type of current (alternating current) and voltage at the installation site have to conform with the data on the type plate (see Appliance at a glance).

The socket must be properly earthed and fused. The tripping current for the fuse must be between 10 A and 16 A.

It must be easily accessible so that the appliance can be quickly disconnected from the supply in an emergency. It must be outside the area of the rear of the appliance.

u Check the electrical connection. u Plug in the power plug.

4.7 Switching on the appliance

u Press the On/Off button Fig. 3 (1).	temperature display and
w The appliance is switched on. The
Alarm symbol Fig. 3 (7) flash until the	temperature is cold
enough.

w If "DEMO" is displayed, demo mode is activated. Please contact the after sales service.

5 Control

5.1Brightness of the temperature display

You can adjust the brightness of the temperature display to the light conditions of the room in which the appliance is installed.

5.1.1 Adjusting the brightness

The backlight can either be switched off or set to one of 5 levels. The backlight is switched off ex works.

u To activate the setting mode: Press the SuperFrost button Fig. 3 (4) for about 5 seconds.

w The menu symbol Fig. 3 (6) shines and the child lock symbol Fig. 3 (9) flashes.

u Press the setting button Fig. 3 (2) to select the brightness function.

w The child lock symbol Fig. 3 (9) goes out and the brightness symbol Fig. 3 (8) flashes.

u To confirm: Briefly press the SuperFrost button Fig. 3 (4). w The brightness symbol Fig. 3 (8) shines.

u Using the setting button Fig. 3 (2), select either "off" or the brightness wanted. The more display fields of the tempera- ture display that light up, the brighter it is. If no field is lit up, it means "off".

u To confirm: Press the SuperFrost button Fig. 3 (4). w The brightness symbol Fig. 3 (8) flashes.

w The brightness is adjusted to the new value.

u To deactivate the setting mode: Press the On/Off button Fig. 3 (1).

-or-

u Wait for 5 minutes.

w The brightness symbol Fig. 3 (8) and the menu symbol Fig. 3 (6) go out.

w The temperature is indicated again in the temperature display.

5.2 Child proofing

The child-proofing function enables you to make sure that the appliance is not inadvertently switched off by playing children.

5.2.1 To activate child lock

u To activate the setting mode: Press the SuperFrost button Fig. 3 (4) for about 5 seconds.

w The menu symbol Fig. 3 (6) shines and the child lock symbol Fig. 3 (9) flashes.

u Briefly press the SuperFrost button Fig. 3 (4) to select the child lock function.

w The child lock symbol Fig. 3 (9) shines. The -15 °C and -21 °C LEDs shine in the temperature display.

u Briefly press the SuperFrost button Fig. 3 (4) to activate the child lock.

w The child lock symbol Fig. 3 (9) flashes. The -15 °C and -21 °C LEDs go out.

u To deactivate the setting mode: Press the On/Off button Fig. 3 (1).

-or-

u Wait for 5 minutes.

wThe menu symbol Fig. 3 (6) goes out and the temperature is displayed again in the temperature display. The child lock symbol Fig. 3 (9) shines.

5.2.2 To deactivate child lock

u To activate the setting mode: Press the SuperFrost button Fig. 3 (4) for about 5 seconds.

w The menu symbol Fig. 3 (6) shines and the child lock symbol Fig. 3 (9) flashes.

u Briefly press the SuperFrost button Fig. 3 (4) to select the child lock function.

w The child lock symbol Fig. 3 (9) shines. The -18 °C LED shines in the temperature display.

u Briefly press the SuperFrost button Fig. 3 (4) to deactivate the child lock.

w The child lock symbol Fig. 3 (9) flashes.

u To deactivate the setting mode: Press the On/Off button Fig. 3 (1).

-or-

u Wait for 5 minutes.

wThe menu symbol Fig. 3 (6) goes out and the temperature is displayed again in the temperature display. The child lock symbol Fig. 3 (9) no longer shines.

5.3 Temperature alarm

The temperature display and the alarm symbol Fig. 3 (7) flash at the same time.

The Alarm symbol Fig. 3 (7) goes out and the temperature display stops flashing, once the temperature has reached the appropriate level of coldness again.

5.4 Freezing food

The rating plate indicates the maximum quantity of fresh food you can freeze within 24 hours (see Appliance at a glance) under "Freezing capacity ... kg/24h".

The maximum load of frozen food for the drawers is 25 kg each and for the shelves 35 kg each.

6